Anoutway Jungle vs. Cheetah Pro Review: Which Electric SUP Pump Is Better?

Inflating a stand-up paddle board by hand is not exactly the most enjoyable way to begin a day on the water. A manual pump works, of course, but reaching 15 PSI can take considerable time and energy. By the time the board is ready, your arms may already feel as though you have completed the first part of your workout. A corded option like the Gicle AP-883L is another budget friendly way to skip that arm workout.

A rechargeable electric SUP pump solves this problem, but choosing between two similar models is not always easy. The Anoutway Jungle and Anoutway Cheetah Pro both offer cordless operation, automatic shut-off, inflation and deflation functions, and a maximum pressure of 20 PSI.

However, there are some important differences between them. The Jungle is larger and more affordable, while the Cheetah Pro is smaller, lighter, and noticeably faster. My in-depth Anoutway Jungle vs. Cheetah Pro comparison will help you decide which pump is the better match for your paddleboarding setup.

Choosing the right Electric SUP Pump

Buying an electric SUP pump and then discovering that it is too slow, too large, or unable to inflate all your boards is frustrating. You have already spent the money, and now you are either stuck with a pump you do not enjoy using or have to purchase another one.

So, the first thing to understand is that the best pump is not necessarily the model with the largest battery or the most advanced specifications. Your decision should depend on how many boards you inflate, how much space you have available, and whether inflation speed is worth paying extra for.

Both Anoutway pumps are capable of inflating a SUP to 15 PSI without being connected to a car. This is their biggest advantage compared with standard 12V pumps. The Gicle AP-892LB shares that same cordless advantage, with its own set of trade-offs in speed and capacity.

You can carry either pump directly to the water, connect the hose, select the desired pressure, and let the pump do the work. There is no need to park close to your launch point or deal with a long power cable.

With that said, the Jungle and Cheetah Pro are not completely identical. The Jungle offers excellent performance for a lower price, while the Cheetah Pro improves portability and inflation speed.

Anoutway Jungle vs. Cheetah Pro: your 101 comparison

At first, the Anoutway Jungle and Cheetah Pro appear very similar. Both have the same yellow-green color scheme, four control buttons, digital pressure displays, dual-stage pumping systems, and a maximum pressure of 20 PSI.

However, once you place them next to each other and test them on the same paddle board, the differences become much clearer.

The Jungle weighs 1.35 kg and measures 23 × 16 × 8.5 cm. It uses a 4000mAh, 11.1V battery with a total energy capacity of 44Wh.

The Cheetah Pro weighs only 900 grams and measures 14.3 × 13.5 × 6.7 cm. Despite being significantly smaller, it contains a larger 4500mAh, 14.8V battery with a total capacity of 66.6Wh.

So, let’s start first with…

The Anoutway Jungle

The Anoutway Jungle is an excellent all-around electric SUP pump for paddlers who want cordless convenience without paying for the most compact model. Its yellow-green housing looks sporty and distinctive, making it easy to recognize among the rest of your paddleboarding equipment.

The housing feels sturdy, and the overall design is practical rather than overly complicated. At 1.35 kg, it is still light enough to carry in a SUP bag, backpack, or vehicle. However, it is noticeably larger than the Cheetah Pro.

On the front of the pump, you will find four control buttons and a small digital screen. Although the display is not especially large, the pressure reading is clear enough to see while the pump is operating.

The inflation and deflation connections are marked by triangle symbols. This makes it relatively easy to identify where the hose should be connected, although first-time users should still check that they have selected the correct port before starting.

Using the Jungle is straightforward. After switching it on, you can press the button with the two arrows to change between PSI and BAR. The plus and minus buttons are used to set the desired target pressure, up to a maximum of 20 PSI.

Once the correct pressure has been selected, one press of the power button starts the inflation process. The pump begins moving a large volume of air into the board before automatically changing to its high-pressure stage.

This dual-stage process is useful because a SUP requires two different types of airflow. During the first stage, the pump fills the board rapidly with a high volume of air. During the second stage, it produces the pressure needed to make the board firm and ready for paddling.

In my test, the Jungle inflated the board to 15 PSI in approximately seven minutes. Inflation time will naturally vary depending on the board’s length, width, thickness, and total internal volume.

Still, seven minutes is a very good result. It is considerably more convenient than pumping manually and fast enough for most recreational paddleboarders.

And what comes with the Anoutway Jungle?

The following items are included with the pump:

• Air pump
• Air hose
• Seven different nozzles
• USB-C cable
• Manual
• Spare parts

The seven attachments make the Jungle useful for more than paddle boards. You can also use it to inflate compatible kayaks, boats, beach balls, inflatable tents, air mattresses, and other inflatable equipment.

My piece of friendly advice is to keep the smaller attachments together in a separate pouch. They are useful, but because some are very small, they can easily disappear at the bottom of a large SUP bag.

The USB-C charging connection is another welcome feature. You do not have to carry an unusual proprietary charging cable, and it is easier to replace the cable if it is lost or damaged.

Anoutway Jungle Design

The Jungle receives a design score of 8 out of 10. It looks good, feels robust, and has a clear control layout. The bright green and yellow finish is more interesting than the plain black or gray housings found on many electric SUP pumps.

The main disadvantage is simply its size. The pump is compact enough for normal use, but it is considerably taller and bulkier than the Cheetah Pro.

That may not matter when you transport your equipment by car. However, when space in your backpack or SUP bag is limited, the smaller Cheetah Pro is easier to pack.

Good for:

The Jungle is a great option for recreational paddlers, couples, and families who want a reliable battery-powered pump at a reasonable price.

It is especially suitable if you normally inflate one to three boards and do not mind carrying a slightly larger pump. It is also a sensible choice when you want cordless operation but do not need the fastest or smallest model available.

Pros and Cons: Anoutway Jungle

When it comes to the positive side of the Jungle, its greatest strength is the balance between price and performance. It inflates a SUP to 15 PSI in around seven minutes, automatically stops at the selected pressure, and can handle approximately three SUPs on one battery charge.

The pump is also relatively quiet for an electric SUP pump. It is still clearly audible, particularly after switching into high-pressure mode, but the sound is not as harsh or irritating as it can be with some competing pumps.

The deflation function is another practical advantage. Once you finish paddling, you can connect the hose to the deflation port and remove most of the air from the board. This makes rolling and packing the SUP easier.

The main drawback is that the Jungle is larger and heavier than the Cheetah Pro. It is also around one minute and 30 seconds slower when inflating the same board to 15 PSI.

These are not major problems, especially considering the Jungle’s lower price. However, paddlers who value minimal size and maximum speed may prefer the Cheetah Pro.

The Anoutway Cheetah Pro

The Anoutway Cheetah Pro is the more advanced and more compact pump in this comparison. It offers the same maximum pressure of 20 PSI but places the technology inside a much smaller housing.

It weighs only 900 grams and measures 14.3 × 13.5 × 6.7 cm. That makes it approximately 450 grams lighter than the Jungle and dramatically shorter.

The pump is genuinely small enough to fit comfortably into one hand. For paddlers who travel frequently or carry their equipment over longer distances, this is a considerable benefit.

Despite the compact housing, the Cheetah Pro contains a 4500mAh battery operating at 14.8V. Its 66.6Wh energy capacity is significantly higher than the Jungle’s 44Wh capacity.

The controls are similar to those on the Jungle, but the Cheetah Pro offers additional operating options. Pressing the button with the two arrows allows you to switch between automatic, low, and high modes.

Holding that same button for longer changes the pressure unit between PSI and BAR. You can then use the plus and minus buttons to set the desired pressure.

Once everything is set, pressing the power button starts the pump. Just like the Jungle, it automatically stops when the board reaches the selected pressure. This prevents overinflation and means you do not need to watch the pressure continuously.

The biggest difference is inflation speed. In my test, the Cheetah Pro inflated the same SUP to 15 PSI in only five minutes and 30 seconds.

That makes it one minute and 30 seconds faster than the Jungle. On paper, this may not sound like an enormous difference, but it is noticeable in practical use.

The time saving becomes even more valuable when you have several boards to inflate. If you prepare three SUPs, the Cheetah Pro can potentially save several minutes compared with the Jungle.

Its fast performance is particularly impressive considering the pump’s small dimensions and low weight. Compact battery pumps sometimes sacrifice power for portability, but the Cheetah Pro manages to offer both.

Interestingly, the Jungle is slightly faster when removing air from the board. Therefore, the Cheetah Pro wins the inflation test, while the Jungle has a small advantage during deflation.

And what comes with the Anoutway Cheetah Pro?

The Cheetah Pro package includes:

• Air pump
• Air hose
• Seven different nozzles
• USB-C cable
• Manual
• Spare parts
• Waterproof bag

The waterproof storage bag is a useful addition that is not included in the standard Jungle package. It protects the pump during transportation and keeps the accessories together.

However, the bag should not be treated as permission to leave the pump exposed to water. The pump is an electronic device, so it is still sensible to keep it away from splashes, rain, and wet equipment whenever possible.

Good for:

The Cheetah Pro is ideal for paddlers who want the fastest inflation time in the smallest possible package.

It is particularly useful for travelers, touring paddlers, van-life setups, and anyone who regularly carries a SUP over longer distances. It is also a good choice for people who inflate multiple boards and want to reduce their total preparation time.

Pros and Cons: Anoutway Cheetah Pro

The Cheetah Pro earns a design score of 9 out of 10 and a performance score of 10 out of 10. Its small dimensions, low weight, strong battery, and fast inflation time create an excellent combination.

The pump is easy to carry, simple to operate, and capable of inflating approximately three SUPs to 15 PSI on one charge. Its automatic shut-off system works as expected, and the multiple operating modes provide more control than the Jungle.

Noise levels are also reasonable. Like the Jungle, the Cheetah Pro starts with a high-volume airflow stage and then changes to a more intense high-pressure stage. It is not silent, but the sound is relatively manageable.

The included waterproof storage bag is another advantage. It makes the complete set easier to organize and gives the compact pump some additional protection inside a SUP bag or vehicle.

There are no serious disadvantages to report. The main consideration is the price. At $129.99, the Cheetah Pro costs $20 more than the Jungle.

The Cheetah Pro is also slightly slower during deflation. However, most users will probably value the faster inflation speed more highly, since inflation is the part of the process during which they are waiting to get onto the water.

Final words for the Anoutway Jungle and Cheetah Pro comparison

As you can see, both Anoutway pumps are excellent cordless options. They are easy to operate, relatively quiet, and powerful enough to inflate a SUP to 15 PSI in well under 10 minutes.

The Anoutway Jungle receives 8 out of 10 for design, 9 out of 10 for performance, and 9 out of 10 for price-to-quality value.

At $109.99, it is the better choice for value-focused paddlers. It is larger and slightly slower, but its seven-minute inflation result is still excellent. It also performs slightly better when deflating a board.

The Anoutway Cheetah Pro receives 9 out of 10 for design, 10 out of 10 for performance, and 9 out of 10 for price-to-quality value.

At $129.99, it is the better choice when portability and inflation speed are the priorities. Its 900-gram weight and extremely compact housing make it easier to pack, while the five-minute-and-30-second inflation time is seriously impressive.

You should buy the Jungle if you want to save $20 and do not mind carrying a somewhat larger pump. It offers nearly all the essential features of the Cheetah Pro and is more than fast enough for normal recreational use.

You should buy the Cheetah Pro if you have limited storage space, travel frequently, inflate several boards, or simply want to get onto the water as quickly as possible.

In terms of ease of use, there is very little separating the two models. Even without reading the manual, the controls are mostly self-explanatory. Select the desired pressure, connect the hose, press the power button, and wait for the automatic shut-off.

Both pumps also provide excellent versatility. Thanks to the seven included nozzles, they can be used for inflatable boats, kayaks, tents, beach equipment, and other compatible products.

The built-in batteries are among their greatest strengths. You are no longer dependent on a vehicle, external battery, or electrical outlet. This gives you far more freedom when launching from remote beaches, rivers, and lakes.

Practically, the decision comes down to three factors: price, size, and speed. The Jungle wins on price, while the Cheetah Pro wins on size and inflation performance.

My overall winner is the Anoutway Cheetah Pro. Its smaller dimensions, lower weight, stronger battery, and faster inflation make it the more impressive pump. The additional $20 feels justified, particularly for frequent paddleboarders.

However, the Jungle remains a very easy recommendation. It delivers excellent results, offers the same 20 PSI maximum pressure, and can inflate approximately the same number of boards per battery charge.

You really cannot make a bad choice between these two pumps. Choose the Cheetah Pro when you want the fastest and most portable option. Choose the Jungle when you want to spend less while still getting a powerful, reliable, and convenient rechargeable SUP pump.